2026 Jeep Grand Wagoneer Alignment in Albuquerque, NM

Every 2–3 years or about 30,000 miles is a common guideline for an alignment interval.

Road conditions, tire wear, and any suspension work can change that schedule; the dealership's service team inspects your suspension and advises a tailored interval. In Albuquerque, a single big pothole or curb hit can justify an earlier check. Book a check if you replace tires, notice uneven wear, or after suspension repairs.

• Typical guideline: every 2–3 years or ~30,000 miles
• Check after new tires or suspension work
• Bring the vehicle in after a major pothole or curb impact

Four common signs are uneven tire wear, the vehicle pulling to one side, an off-center steering wheel, and vibration at speed.

Those symptoms point to caster/camber/toe being out of factory tolerance or to worn suspension parts. Our technicians visually inspect tires and suspension on arrival and will provide a clear explanation of findings and next steps. A before-and-after printout shows measured improvements after adjustment.

• Uneven or cupped tire wear visible on tread
• Vehicle drifts left or right without steering input
• Steering wheel isn't centered when driving straight

Includes caster, camber, and toe adjustments to factory specifications, plus a suspension inspection and before-and-after alignment printouts.

The complete check starts with a visual suspension and tire inspection, followed by measurement with OEM-grade alignment equipment. Adjustments are made to factory tolerances and a road test confirms drivability. The printout documents the original readings and final results for your records.

• Inspection of tie rods, ball joints, and mounts before adjustment
• Adjustment of caster, camber, and toe to factory specs
• Printed before-and-after alignment readings and road test

If there is play or visible damage in steering components—torn boots, loose tie rods, or worn ball joints—alignment alone may not hold.

Technicians will inspect steering and suspension for wear or damage before attempting an alignment. If components are worn, we document the parts that need replacement and explain how repairs affect alignment. Repairs followed by a factory-spec alignment restore predictable handling.

• Look for torn boots, loose joints, or excessive steering play
• Dealer inspection determines if parts must be repaired first
• Recheck alignment after any suspension or steering repair

Not always—if the vehicle tracks straight, shows even tire wear, and has no steering symptoms, you can usually wait until the next scheduled check or every 2–3 years.

Nonetheless, a routine inspection identifies early wear and ensures caster/camber/toe remain within factory limits. If you plan a long trip, install new tires, or recently hit a pothole, a preventative alignment provides documentation and peace of mind.

• Defer if tires wear evenly and steering is centered
• Consider alignment after tire replacement or impacts
• Inspection is quick and documents vehicle condition

Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque provides four-wheel alignment services in Albuquerque; schedule service online.

The service department uses alignment equipment and follows manufacturer procedures, with a technician inspection before adjustments. Use the online scheduler to pick a convenient time or check for current service specials. The team will provide a before-and-after printout and explain any recommended repairs.

• Schedule service online: schedule service
• Check current offers at service specials
• Before-and-after documentation provided with every alignment

The four-wheel alignment begins with a detailed inspection of suspension, steering, and tire condition. Technicians verify tie rods, ball joints, control-arm mounts, and shock/strut condition to confirm the vehicle can hold an alignment. After measuring caster, camber, and toe with OEM-grade equipment, adjustments are made to factory tolerances and the vehicle is road-tested at speed to validate handling.

Documentation includes a printed before-and-after alignment report so you can see the measured corrections. If parts are found worn or damaged, the technician will explain recommended repairs before final alignment. For appointment times, schedule service.

Our service center welcomes drivers from Albuquerque and nearby neighborhoods, offering alignment checks that fit local driving needs. Technicians account for typical city and highway driving when confirming factory alignment targets. If you experience pulling, vibration, or uneven tire wear after hitting a curb or pothole, bring the vehicle in for inspection.

The service advisor will outline findings, provide the alignment report, and recommend required repairs if any suspension components are worn. You can book an appointment online using the scheduling link or review current service specials before visiting.

Schedule your visit: schedule service.

Alignment procedures follow manufacturer specifications for caster, camber, and toe on front and rear axles and use OEM calibration standards. Technicians use computerized alignment racks to measure each axis and apply adjustments until readings fall within factory tolerance bands. After adjustments, a road test confirms centered steering and correct tire tracking.

Common alignment-related issues caught during service include uneven tire wear and steering offset, both addressed by precise toe and camber corrections. Suspension component wear is documented and quoted if replacements are needed before a lasting alignment can be performed.

Bring your 2026 Jeep Grand Wagoneer to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for a factory-spec alignment — schedule service.