2024 RAM 2500 Air Filter in Albuquerque, NM

Exact pricing varies; the 2024 Ram 2500 has a factory Base MSRP of $55,200 and Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque provides up-front pricing for filter replacements.

Because this listing does not include a manufacturer's filter price range, the dealership provides a clear, written estimate before work begins. Typical dealer service quotes include the OEM-spec filter, labor, inspection of intake components, and proper disposal. To get a firm price for the engine and cabin filters for your specific 2024 Ram 2500, request an estimate.

• Up-front written pricing from LHM Jeep Ram ABQ
• Includes OEM-spec part installation and inspection
• Get a custom estimate by phone or online

The 2024 Ram 2500 uses a 6.4L V8 (6417 cc); the manufacturer-recommended interval is not listed in this vehicle record, so follow visual inspections and service advice for Albuquerque driving conditions.

Desert dust, high‑wind conditions, and frequent highway towing around Albuquerque can load filters faster than standard intervals. Have the engine intake inspected at routine service visits so technicians can advise based on actual filter condition rather than a calendar number. If you drive in dusty or unpaved areas regularly, consider more frequent checks.

• Inspect the engine air filter at every oil change or service visit
• Increase inspection frequency after dusty drives or heavy towing
• Dealership inspection includes intake housing and MAF visual check

This listing does not include a cabin-filter interval, so replace or inspect the cabin filter based on HVAC performance and local air quality in Albuquerque.

Pollen season, city dust, and regional allergens in Albuquerque can clog the cabin filter faster than normal. If you notice reduced airflow, unusual odors, or increased dust inside the cabin, schedule a filter check. The service team will confirm the correct OEM part and replace it as needed.

• Monitor HVAC airflow and odor as primary indicators
• Ask technicians to confirm the OEM cabin filter part number
• Replacement is straightforward and improves passenger air quality

The engine air filter on the 2024 Ram 2500 is housed in the engine bay as part of the intake assembly feeding the 6.4L V8 (6417 cc).

Access typically requires opening the engine bay and removing the intake housing cover; some models use clips or screws. Technicians at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque will inspect the housing, check for debris, and verify the mass airflow (MAF) sensor condition while replacing the filter.

• Located inside the engine bay intake housing
• Technician inspects intake boots, clamps, and MAF sensor
• Dealer replacement ensures correct fit and sealing

The engine air filter protects the 6.4L V8 combustion system, while the cabin air filter protects HVAC airflow and passenger air quality inside the cab.

The engine filter prevents dust and debris from entering the intake and affecting performance or fuel efficiency; the cabin filter traps pollen, dust, and particulates from outside air before they enter the passenger compartment. Both serve distinct systems and should be inspected separately during service.

• Engine filter = combustion air protection and engine performance
• Cabin filter = HVAC and passenger air quality
• Dealer inspects both systems for complete air management

A clogged engine air filter can reduce the performance of the 410-hp 6.4L V8 and cause lower fuel economy; clogged cabin filters show as weak HVAC airflow or musty odors.

If you feel sluggish acceleration, reduced towing responsiveness, or notice black smoke or a rough idle, the engine intake should be inspected. For the cabin, weak vents, increased dust in the cabin, or a persistent odor indicate a cabin filter replacement. Technicians can confirm by visual inspection.

• Engine: reduced power, rough idle, lower MPG
• Cabin: weak airflow, odors, more dust inside vehicle
• Dealer inspection includes intake and HVAC checks

You can often replace the engine air filter yourself on the 2024 Ram 2500, while the cabin filter may require trim removal; the dealer adds intake and MAF sensor inspections.

DIY replacement is common for the engine filter if you have basic tools and space; the cabin filter may need glove-box or trim removal. Choosing dealer service ensures OEM-spec parts, a visual inspection of intake components, and documentation of work—useful when maintaining a used 2024 Ram 2500.

• Engine filter: generally DIY-friendly for many owners
• Cabin filter: might require trim removal or clips
• Dealer service includes intake/MAF inspection and OEM parts

The dealership installs OEM-spec filters when available to match factory specifications for the 6.4L V8 and vehicle systems.

Using OEM-spec parts helps maintain factory fit, filtration efficiency, and part compatibility for the 2024 Ram 2500. If you prefer an aftermarket option, discuss it with service staff; otherwise, the shop will install the correct factory-referenced filter and perform related intake and HVAC checks.

• OEM-spec filters align with factory performance targets
• Dealership service documents the part number and installation
• Ask service advisors about available parts and options

When the engine or cabin air filter is serviced on a 2024 Ram 2500, technicians follow a step-by-step procedure that protects both performance and comfort. First, the service technician visually inspects the current engine air filter element and the airbox for debris, then inspects intake boots, clamps, and the mass airflow (MAF) sensor for contamination. Next, the cabin filter is checked through the access panel (often behind or below the glove box) and replaced if airflow or filter condition warrants it. The service visit also includes sealing checks, torque verification of intake clamps, and a short road test when applicable to confirm drivability.

Replacements use OEM-spec filter references when available and include proper disposal of the old filters. If you need financing for larger service packages, mention available options when you book. To schedule this work, schedule service online.

The 2024 Ram 2500 is equipped with a 6.4L V8 (6417 cc), 8 cylinders and a factory-rated 410 hp at 5600 rpm, and is built as a crew cab pickup with a 140.5" wheelbase. Engine and cabin filters are sized to meet those factory specifications; exact OEM part numbers vary by equipment and model options. This vehicle is a standard pickup truck class vehicle with a 32.0-gallon fuel capacity and an 8-speed transmission. Common service callouts can include accelerated filter loading after dusty drives or heavy towing, situations in which the intake and MAF sensor should be checked during filter replacement.

Bring your 2024 Ram 2500 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for OEM-spec filter service — schedule service.

Service for the 2024 Ram 2500 in Albuquerque should account for regional conditions: wind-driven dust, seasonal pollen, and occasional unpaved road use can accelerate filter wear and HVAC loading. Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque serves drivers across Albuquerque and nearby communities and provides inspection-based recommendations tailored to local climate factors. During a visit, technicians will check both engine and cabin filtration systems, inspect intake seals and the MAF sensor, and document replacement needs so you have a clear record for maintenance of the used 2024 Ram 2500.

To book an inspection or replacement, visit our schedule service page or review current service specials before you come in.