2024 RAM 1500 Alignment in Albuquerque, NM

Every 2–3 years or about 30,000 miles is common guidance for an alignment on a 2024 Ram 1500.

Regular alignments keep tire wear even and steering centered. In Albuquerque, get an alignment sooner after visible suspension work, a hit to a curb or a major pothole. If you drive off‑road, haul heavy loads, or hit winter frost heaves, check alignment more often.

• Schedule after suspension repairs or new tires
• Check alignment after major pothole or curb impacts
• Consider more frequent checks for heavy towing or off‑road use

Common signs are uneven tire wear, the truck pulling to one side, an off‑center steering wheel, or vibration at highway speeds.

Those symptoms often show first on the front tires but can affect the whole vehicle. In Albuquerque, repeated encounters with potholes and road repairs increase the chance you'll notice these issues sooner. A technician will inspect tires and steering components to find the root cause.

• Uneven tread wear across tires
• Vehicle drifts or pulls while driving straight
• Steering wheel sits crooked at neutral

Technicians adjust caster, camber, and toe to factory specifications and provide a before/after printout with a suspension inspection and road test.

The service combines computerized measurements with a visual check of tie rods, ball joints, bushings, and shocks. If any worn parts are found, the advisor explains required repairs before final alignment. Documentation helps you see the correction and supports future warranty needs.

• Computerized caster/camber/toe measurement and adjustment
• Suspension and steering component inspection
• Printed before/after alignment readings and road test

If worn tie rods, ball joints, control‑arm bushings, or shocks are present, alignment may not hold and those parts typically need repair first.

Our service technicians look for play, noise, and visible wear during an inspection before adjusting angles. In many cases the alignment is completed after replacing failed components; otherwise corrective adjustments can revert quickly. We report findings and an estimated repair plan so you can decide how to proceed.

• Inspection finds play or torn boots in steering joints
• Visible damage to control arms or mounts
• Alignment rechecked after any suspension repair

Not always; alignments are recommended after suspension work, new tires, major pothole impacts, or on a 2–3 year schedule even if tracking seems straight.

A truck that appears straight can still run outside factory toe or camber tolerances, shortening tire life or reducing fuel efficiency. Our advisors will suggest an alignment when a preventive check or recent event indicates risk. You can view current service offers on our service specials page.

• Good after new tire installation
• Recommended following suspension repairs
• Useful preventive maintenance for tire longevity

Yes — before-and-after alignment printouts are provided with a standard four‑wheel alignment at our service center.

These printouts show measured caster, camber, and toe values and confirm adjustments were made to factory targets. They are useful for warranty records and to compare results after any future suspension work. Ask your service advisor for a copy at check‑in or when you schedule service.

• Printed measurements before adjustment
• Printed measurements after adjustment
• Road test verification recorded by the technician

Alignment work for the 2024 Ram 1500 centers on factory caster, camber, and toe targets for front and rear suspension. Technicians use computerized alignment racks and OEM‑calibrated heads to measure each wheel angle and set adjustments to the manufacturer's tolerances. Because the 2024 Ram 1500 has a 144.5‑inch wheelbase, small toe deviations at the front can translate to noticeable steering feel at highway speed; technicians verify toe to ensure straight tracking and even tire wear.

Common contributors to out‑of‑spec readings include worn tie rods, damaged control‑arm bushings, and wheel impacts from potholes. When parts are worn, we document findings and recommend repairs prior to final alignment so the settings hold. Bring your 2024 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for a factory-spec alignment — schedule service.

A standard four‑wheel alignment for the 2024 Ram 1500 begins with a visual and hands‑on inspection of steering and suspension components, including tie rods, ball joints, control‑arm bushings, and shock absorbers. Technicians check tire pressure and tread, place OEM calibration heads on each wheel, and measure caster, camber, and toe. Adjustments are made to factory specifications, followed by a printed before/after report and a road test to confirm corrected handling.

We document any wear or damage discovered during inspection and outline recommended repairs. Alignment work is performed using calibrated equipment and documented to support maintenance records. To book an appointment, schedule service or view current service specials.

Service for the 2024 Ram 1500 is available at the Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque service center. We serve drivers across Albuquerque and nearby communities, addressing alignment issues that stem from local road conditions such as potholes, road construction, and occasional frost heaves. Technicians perform a complete inspection, correct wheel angles to factory targets, and verify results with a road test to restore safe steering and extend tire life.

If you notice pulling, uneven wear, or a crooked steering wheel, bring your 2024 Ram 1500 in for a diagnostic check. Our advisors explain findings, outline repair options when needed, and help set an appointment. For convenience, schedule service online or stop by the service desk for directions and next steps.