2020 Ram Promaster Cargo Van Oil Change

The 2020 Ram Promaster Cargo Van lists a cargo capacity of 420.0.

The 420.0 figure is the manufacturer provided cargo capacity value for the van and helps determine how much equipment or shelving will fit. For upfits or shelving layouts, bring vehicle measurements to the shop and we can confirm fitment for your intended layouts.

• Cargo capacity: 420.0 (manufacturer spec)
• Wheelbase: 159.0 inches for planning cargo modules
• Consult service advisors for custom upfit guidance

The 2020 Ram Promaster Cargo Van is powered by a 3.6L V6 (engine code 6VNAG3.6) with 6 cylinders producing 280 horsepower at 6400 RPM and 260 torque at 4400 RPM.

Those engine figures describe the standard gasoline powerplant for this model year and explain why many operators choose the Promaster for city deliveries and light-duty hauling. Knowing horsepower and torque helps when planning payloads, schedules, and service intervals.

• Engine size: 3.6 L, V6 (6 cylinders)
• Horsepower: 280 @ 6400 RPM; Torque: 260 @ 4400 RPM
• Engine code: 6VNAG3.6 — use for parts and diagnostics

The 2020 Ram Promaster Cargo Van has a fuel capacity of 24.0.

The 24.0 value is the manufacturer-listed fuel capacity for planning range between refuels. For route planning in Albuquerque and surrounding delivery zones, consider payload and speed for more accurate range estimates.

• Fuel capacity: 24.0 (manufacturer spec)
• Use load and driving style to estimate real-world range
• Service can inspect fuel system and recommend filters if needed

Yes — the 2020 Ram Promaster Cargo Van is front wheel drive (FWD).

Front-wheel drive affects traction, loading strategies, and some repair procedures compared with rear- or all-wheel-drive vans. Our technicians reference the FWD layout when performing driveline inspections, brake work, and tire rotations for this model.

• Drivetrain: front wheel drive
• FWD influences weight distribution and traction under load
• Technicians use FWD-specific service steps for inspections

The 2020 Ram Promaster Cargo Van lists overall length 236.2, overall height 105.9, overall width 82.7, and overall width with mirrors 98.0.

These manufacturer measurements help with parking clearances, garage fits, and loading-dock planning. If you operate in tight urban yards or need to confirm ramp and door clearances, bring the vehicle to our shop and we can verify measured clearances before modifications.

• Overall length: 236.2 (manufacturer spec)
• Overall height: 105.9; width: 82.7; width with mirrors: 98.0
• Measure clearances before installing roof racks or tall shelving

Dealer service typically includes OEM-spec oil and filter, a multi-point inspection, and documented service records that support warranty preservation.

Independent quick-lube shops can be faster and sometimes less expensive for basic conventional oil changes, but dealer service emphasizes OEM parts, diagnostic access to factory service information, and a full vehicle check. For fleet vehicles or vans under warranty, documented dealer service can simplify future warranty repairs.

• Dealer: OEM-spec oil/filter, multi-point inspection, documented records
• Quick-lube: often faster and lower up-front cost for basic service
• Choose dealer service when warranty documentation or OEM parts are priorities

Full synthetic oil offers improved high-temperature stability and longer oxidation resistance compared with conventional oil; blends are intermediate.

Manufacturers often recommend synthetic oils for modern engines because they maintain viscosity across a wider temperature range and resist breakdown under load. If you run heavy city routes, frequent idling, or tow regularly, full synthetic can reduce breakdown and maintain protection between service intervals. Always follow the OEM guidance in your owner’s manual for the final recommendation.

• Conventional: lowest cost, basic protection for standard use
• Synthetic blend: better protection than conventional at a mid-level price
• Full synthetic: best thermal and oxidation stability for severe use

Yes — Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque provides a full service center that works on Chrysler, Jeep, Dodge, and Ram vehicles.

Our technicians handle routine maintenance, diagnostics, parts replacement, and repairs for the 2020 Ram Promaster Cargo Van. For scheduled maintenance or questions about recommended parts, you can schedule a service appointment online or call the service department directly to discuss needs and availability.

• Full service center for Chrysler, Jeep, Dodge, and Ram vehicles
• Schedule online via the service scheduler or call to confirm availability
• Service team documents work with dealer records for transparency

An oil change for the 2020 Ram Promaster Cargo Van at our dealership follows a stepwise process designed to meet OEM-focused expectations while documenting the work for your records. Technicians drain the old oil, replace the oil filter with the correct part for the 3.6L V6, and refill using the oil grade recommended in the vehicle’s owner literature. The service includes a multi-point inspection of belts, hoses, fluid levels, and tire pressures, plus top-offs of other companion fluids as needed. We record the service in the vehicle’s history and provide a printout detailing work performed and parts used. This documentation helps fleet managers and warranty holders maintain clear maintenance records. To set an appointment, please schedule service or call the service desk directly.

Owners of the 2020 Ram Promaster Cargo Van in Albuquerque can bring their vans to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque for factory-aware maintenance and repair. Local driving patterns, stop-and-go routes, and dusty conditions can accelerate certain wear items; scheduled oil changes and inspections help identify issues before they affect uptime. Our service advisors will review vehicle service history, recommend the correct oil option based on usage, and explain any needed repairs. For service offers, check our service specials, or schedule service to book an appointment.

Key manufacturer specifications for the 2020 Ram Promaster Cargo Van help ensure correct servicing. The van is equipped with a 3.6L V6 gasoline engine (engine code 6VNAG3.6); use the oil viscosity and type specified in the owner’s manual and the correct OEM filter to maintain engine protection. Useful vehicle specs to reference during service include the 24.0 fuel capacity, 159.0-inch wheelbase, and the cargo capacity of 420.0 when planning heavy loads. Technicians cross-check part numbers and service intervals against factory documentation and note any service bulletins that affect oil recommendations or drain procedures. Bring your 2020 Ram Promaster Cargo Van to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for an OEM-spec oil change — schedule service.