2020 Ram 1500 Alignment

A typical four-wheel alignment for a 2020 Ram 1500 takes about 60 minutes at the dealership service center.

That time includes a suspension and steering inspection, measurement on OEM-calibrated alignment racks, adjustments, and a brief road test on Albuquerque streets. Heavier repairs or worn components add time; the technician will report any needed parts before work continues.

• Full suspension and tie-rod inspection before adjustment
• Adjustment of caster, camber, and toe to factory targets
• Road test to confirm steering return to center

Get an alignment every 2–3 years or about every 30,000 miles, and always after suspension work or a major pothole impact.

Local road conditions around Albuquerque—periodic construction and occasional potholes—can accelerate misalignment. Regular checks during tire rotations or when you notice handling changes keep the 2020 Ram 1500 tracking correctly and protect tire life.

• Check alignment at routine tire rotations
• Schedule an alignment after replacing suspension parts
• Inspect alignment after hitting a large pothole or curb

Common signs include uneven tire wear, the truck pulling to one side, an off-center steering wheel, or new vibration at highway speeds.

Those symptoms often show first on the 2020 Ram 1500 after rough city streets or after winter road work. Early detection prevents accelerated tire wear and preserves handling.

• Uneven tread wear across tires
• Vehicle drifts left or right without steering input
• Steering wheel not centered when driving straight

A four-wheel alignment includes suspension and tie-rod inspection, caster/camber/toe measurement and adjustment to factory specs, plus before-and-after printouts and a road test.

The process for a 2020 Ram 1500 uses calibrated alignment racks and reference values from the manufacturer so adjustments meet OEM targets. Technicians document readings and will explain any suspension repairs needed to hold alignment over time.

• Inspect steering, ball joints, and tie rods
• Measure and adjust caster, camber, and toe
• Provide printed before/after alignment measurements and road test

If adjustments don’t hold or the truck has excessive play, worn tie rods, ball joints, or struts are likely and need repair before a lasting alignment.

Our technicians inspect the 2020 Ram 1500’s suspension before alignment to identify worn components that prevent proper alignment. If parts are needed, you’ll receive a repair estimate and an explanation of why those repairs protect tire life and handling.

• Look for loose steering or clunking—signs of worn joints
• Alignment checks after repairs ensure adjustments hold
• Technician documents needed parts and recommended next steps

Not always; if the 2020 Ram 1500 tracks straight with even tire wear, alignment can be deferred, but it’s recommended after suspension work or noticeable symptoms.

Routine inspections during tire service or after hitting a curb are a practical way to confirm alignment. For Albuquerque drivers, preventative checks help avoid premature tire replacement caused by hidden drift or subtle toe issues.

• Check alignment if you replace tires or suspension parts
• Inspect if you notice minor steering drift or vibration
• Documented before/after readings justify the service

Service for the 2020 Ram 1500 in Albuquerque focuses on restoring factory handling and maximizing tire life for local driving conditions. Our team evaluates the truck’s steering and suspension, checks tire pressures and wear patterns, and uses calibrated alignment equipment to return caster, camber, and toe to manufacturer targets. Local streets and periodic construction can produce pothole damage or jarring impacts that shift alignment; addressing those promptly reduces uneven tire wear and improves stability on highway and canyon routes around Albuquerque.

We diagnose whether an alignment alone will correct the issue or whether worn components require repair. After adjustments, the 2020 Ram 1500 is road-tested on local routes to confirm steering return and handling. For a factory-spec alignment, schedule service or consult our service specials for current offers.

A four-wheel alignment for your 2020 Ram 1500 follows a step-by-step process designed to meet OEM requirements. The technician begins with a visual inspection of steering and suspension components, checking tie rods, ball joints, and bushings for play or wear. Next, tires are inspected for uneven wear and pressures are set to specification. The truck is placed on an alignment rack where caster, camber, and toe are measured and adjusted for both front and rear axles to factory targets. Technicians complete a road test and provide printed before-and-after readings that document the corrections made.

This documented approach helps you track how the 2020 Ram 1500’s alignment changed and supports future service decisions. If additional repairs are necessary, our team explains the work and estimated time. To arrange service, schedule service.

Factory alignment for the 2020 Ram 1500 targets caster, camber, and toe as specified by the manufacturer for both front and rear suspension. Technicians use OEM-calibrated alignment equipment and follow published Ram specifications to ensure adjustments return the steering geometry to factory values. Common issues observed on full-size pickups include toe drift from worn tie rods, camber changes after hitting curbs or potholes, and premature inner or outer tire wear when alignment is out of spec.

Because the 2020 Ram 1500 is often driven on mixed city and highway routes in Albuquerque, prompt alignment after noticeable symptoms preserves tire life and handling. Bring your 2020 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for a factory-spec alignment — schedule service.