2020 Dodge Durango Air Filter

Dodge Air Filter service at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque, NM
Schedule Service
Frequently Asked Questions

Frequently Asked Questions

11 common questions answered

where is the engine air filter located on a 2020 dodge durango?

The engine air filter is located in the engine bay inside the rectangular intake box near the front of the vehicle on the passenger side.

On the 2020 Dodge Durango the airbox is a serviceable plastic housing accessed from above the engine; it typically uses clips or screws for removal. This placement keeps the filter ahead of the throttle body for clean airflow into the 6.4L V8 intake. When you visit Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque our technicians will open the housing and show you the filter condition.

  • Located in the engine bay inside the intake/airbox.
  • Accessible from above with basic hand tools or release clips.
  • Inspected during routine maintenance at the dealership service center.
where is the cabin air filter on a 2020 dodge durango?

The cabin air filter is located behind the glove box inside the passenger compartment.

Accessing the cabin filter in the 2020 Dodge Durango usually requires opening and lowering the glove box or removing a small access panel. The cabin filter protects HVAC components and passenger breathing air from pollen, dust, and road debris. If you prefer, technicians at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque will replace and properly dispose of the old filter and report on HVAC airflow.

  • Found behind the glove box on the passenger side.
  • Removal may require releasing glove box stops or an access panel.
  • Replaced as part of HVAC maintenance to preserve airflow and filter performance.
what's the difference between an engine air filter and a cabin air filter on a 2020 dodge durango?

The engine air filter cleans intake air for combustion, while the cabin air filter cleans air entering the passenger compartment through the HVAC system.

The engine filter protects the 6.4L V8 intake and sensors, helping preserve horsepower and fuel economy; the cabin filter removes pollen, dust, and pollutants to protect occupants and the HVAC system. Both serve different systems and should be checked separately during scheduled maintenance at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque.

  • Engine filter: prevents debris from entering the engine and mass airflow sensor.
  • Cabin filter: traps pollen, dust, and road pollutants for passenger air quality.
  • Replacements follow separate access points and service steps.
what are the signs of a clogged air filter on a 2020 dodge durango?

Common signs include reduced engine power, lower fuel economy, rough idle for the engine filter, and weak HVAC airflow or musty odors for the cabin filter.

For the 2020 Dodge Durango’s 6.4L V8, a clogged engine filter can reduce the available horsepower and stress the intake system; a clogged cabin filter shows as reduced blower output and unpleasant smells. If you notice any of these symptoms, schedule an inspection so the service team at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque can diagnose and recommend filter replacement or further HVAC checks.

  • Engine: loss of power, decreased MPG, or rough idle.
  • Cabin: reduced HVAC airflow, fogged windows, or musty smells.
  • Technician inspection confirms filter condition and related components.
can i replace the air filter on my 2020 dodge durango myself, or should larry h. miller chrysler jeep dodge ram albuquerque do it?

You can replace the engine air filter yourself with basic tools, while the cabin filter often takes more interior access and trim removal—dealer service includes inspection and proper disposal.

DIY replacement of the engine filter is common because the airbox is user-accessible; cabin filter replacement behind the glove box can be trickier for some owners. At Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque our technicians perform the replacement, inspect the intake housing and mass airflow sensor, and ensure OEM-spec fit and sealing.

  • Engine filter: generally a straightforward DIY job with hand tools.
  • Cabin filter: may require glove box/trim removal for safe access.
  • Dealer service includes intake/MAF visual checks and proper disposal.
does larry h. miller chrysler jeep dodge ram albuquerque use oem filters for 2020 dodge durango replacements?

The dealership provides OEM-spec filters and installs them to the manufacturer's specifications for the 2020 Dodge Durango.

Using OEM-spec parts helps preserve the intended fit and filtration performance for both engine and cabin systems on the 6.4L V8 Durango. When you book service, the shop will install filters matched to Dodge specifications and document the work so you have a clear service record for the vehicle.

  • Installed to factory specifications for fit and filter efficiency.
  • Includes visual inspection of intake housing and HVAC components.
  • Service records list parts used and date of replacement.
how long does it take to replace the air filters on a 2020 dodge durango at larry h. miller chrysler jeep dodge ram albuquerque?

Most engine or cabin air filter replacements can be completed in a single service visit; actual time varies by workload and the filter(s) being replaced.

Routine filter changes are typically quick, but the total job time depends on whether both engine and cabin filters are replaced and if additional inspections or follow-up tasks are needed. Use the dealership’s online tool to schedule service and get an estimated appointment time for your 2020 Dodge Durango.

  • Engine filter: usually a short, straightforward service task.
  • Cabin filter: may add time if glove box or panels must be removed.
  • Online scheduling provides a better estimate for your appointment.
what is included with an air filter replacement for a 2020 dodge durango at the dealership?

Air filter replacement service at the dealership includes filter installation plus a visual inspection of the intake housing and HVAC components.

Typical dealership service for the 2020 Dodge Durango covers removal and replacement of the specified filter(s), disposal of the old filter, and a visual check of the intake box and MAF sensor for contamination. The service advisor will note any related issues and document parts and labor on your invoice.

  • Engine and/or cabin filter removal and proper replacement.
  • Visual inspection of intake housing and mass airflow sensor.
  • Service record documenting parts used and work performed.
2020 Dodge Durango Air Filter Service in Albuquerque

The 2020 Dodge Durango spends its life on Albuquerque roads subject to dust, pollen, and seasonal wind events that increase filter loading. Drivers from nearby neighborhoods rely on scheduled inspections to avoid reduced airflow and maintain the Durango’s performance and in-cabin comfort. Our service team learns local driving patterns and inspects filters more often when conditions warrant. We serve drivers across the metro area and prioritize clear explanations of findings before any parts are replaced. For a timed appointment, schedule service online.

2020 Dodge Durango Air Filter Specifications

The 2020 Dodge Durango with the 6.4L V8 uses a dedicated engine air filter sized to the factory intake box and a separate cabin filter for the HVAC system. OEM-recommended filter specifications match Dodge factory tolerance for particulate capture and airflow; proper sealing and fit are key to maintaining the rated 475 hp at 6,000 rpm and protecting intake sensors. Common service callouts include dust-loaded elements from dry road seasons and pollen buildup during spring. Bring your 2020 Dodge Durango to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for OEM-spec filter service — schedule service.

What's Included in a 2020 Dodge Durango Air Filter Replacement

Typical air filter replacement for the 2020 Dodge Durango includes: inspection and replacement of the engine filter, inspection and replacement of the cabin filter, a visual check of the intake housing and clamps, and a visual inspection of the mass airflow sensor and surrounding ducts. Technicians document the parts installed and note any damage or excessive contamination that may require additional service. Parts installed follow OEM-spec guidelines and are recorded on your service invoice. To set an appointment, schedule service or visit the service center page for current offers at service specials.