2018 RAM 1500 Alignment in Albuquerque, NM

$89–$129 is the typical four‑wheel alignment price range for a 2018 Ram 1500 at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque.

That range reflects dealer alignment service that includes factory-spec toe, camber, and caster adjustments plus a full suspension inspection. LHM Jeep Ram ABQ provides up-front pricing and a printed before/after alignment report so you see the changes made to your 2018 Ram 1500.

• Price includes caster, camber, and toe adjustments to factory spec.
• Full suspension and tie‑rod inspection performed before adjustments.
• Before/after printout and road test included.

Expect about 60 minutes for a complete four‑wheel alignment on a 2018 Ram 1500 at our Albuquerque service center.

This time allows for a full suspension inspection, adjustments to factory specifications, a before/after printout, and a road test on Albuquerque roads. Complex issues such as worn steering components will add time and we will notify you before authorizing extra work on your 2018 Ram 1500.

• Standard alignment procedure: inspection, measure, adjust, road test.
• Road test checks handling on local streets and highways around Albuquerque.
• Additional repairs (tie rods, ball joints) increase total time.

Get an alignment every 2–3 years or about every 30,000 miles, and after suspension work or a major pothole impact on Albuquerque roads.

The frequency depends on driving conditions: canyon roads, construction zones, and winter freeze/thaw cycles in the Albuquerque area increase the chance of misalignment. If you replace tires, steering, or suspension parts on your 2018 Ram 1500, schedule an alignment to preserve tire life and handling.

• Routine alignment every 2–3 years or ~30,000 miles.
• After replacing tires, shocks, struts, or steering components.
• After hitting large potholes, curbs, or road debris in Albuquerque.

Common signs are uneven tire wear, the vehicle pulling to one side, an off‑center steering wheel, or vibration at speed on your 2018 Ram 1500.

These symptoms often show after hitting potholes on local roads or following suspension work. If you observe any of these while driving around Albuquerque, have the suspension and wheel alignment checked to prevent accelerated tire wear on your 2018 Ram 1500.

• Uneven or cupped tire tread across the set.
• Vehicle pulls left or right with hands off the wheel.
• Steering wheel not centered when driving straight at speed.

A 2018 Ram 1500 four‑wheel alignment includes caster, camber, and toe adjustments to factory specification, a suspension inspection, and a before/after printout.

Technicians measure all four wheels with OEM-calibrated alignment equipment, inspect tie rods, ball joints, and shocks, then make adjustments to bring the 2018 Ram 1500 back to factory settings. You receive documented readings and a road test to confirm handling on Albuquerque streets.

• Suspension and tie‑rod inspection before adjustments.
• Measurement and adjustment of caster, camber, and toe to OEM spec.
• Printed before/after results and a final road test.

If alignment readings won’t hold or you have excessive play in steering, worn tie rods, ball joints, or struts are likely and will need repair before a lasting alignment on your 2018 Ram 1500.

During inspection, our technicians check steering and suspension components and report any worn parts that prevent a stable alignment. In Albuquerque, road hazards and age-related wear can expose these issues; we provide a clear repair estimate and explain why replacement is needed for a permanent fix.

• Technician inspections reveal worn tie rods, ball joints, or bushings.
• Alignment adjustments may not hold if suspension components are loose or damaged.
• We present required repairs and re‑alignment steps before work begins.

The 2018 Ram 1500 receives a full dealer alignment calibrated for Ram engineering and local driving conditions. LHM Jeep Ram ABQ serves Albuquerque and nearby neighborhoods, including Northeast Heights, Downtown, Westside, Taylor Ranch, and Rio Rancho commuters. Our team factors in regional potholes, occasional winter freeze/thaw, and road construction that affect alignment.

With years of local service and manufacturer training, our technicians use OEM alignment machines and follow factory procedures to restore correct steering geometry for your 2018 Ram 1500. Bring your truck in for a measured alignment and a road test on local streets. To schedule, schedule service online or view current offers on service specials.

Service steps for the 2018 Ram 1500 start with a comprehensive inspection of suspension and steering components, followed by tire pressure verification and measurement of caster, camber, and toe. Technicians adjust each axis to factory specifications, perform a before/after printout, and complete a road test to confirm handling on Albuquerque roads.

The process includes a written report showing alignment readings and any recommended repairs. Alignment warranty terms are provided at service check‑in and apply when adjustments are done at our certified facility. To book an appointment, schedule service or check current maintenance offers on service specials.

Alignment adjustments for the 2018 Ram 1500 are made to the manufacturer’s factory specifications for caster, camber, and toe using OEM-calibrated alignment equipment. Technicians document before and after measurements and note common wear items that affect alignment stability, such as tie rods, ball joints, and worn bushings.

Common issue callouts include uneven tire wear from improper toe and steering pull after pothole impacts. Bring your 2018 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for a factory‑spec alignment — schedule service.