2017 Chrysler 300 Air Filter in Albuquerque, NM

The engine air filter is mounted in a plastic airbox in the engine bay on the passenger-side fender area.

The airbox houses the paper element that filters intake air before it reaches the 3.6L V6. On the 2017 Chrysler 300 you can access the housing by opening the hood and unclipping a few fasteners; some models may have a cover secured by screws. Locally, dust and road grit in Albuquerque can accelerate clogging, so visual checks are recommended during routine service.

• Located inside the plastic airbox in the engine bay.
• Accessible from the passenger-side fender area under the hood.
• Held by clips or a few screws depending on the cover style.

The cabin air filter is located behind the glove box, inside the HVAC plenum on the passenger side of the dash.

Replacing the cabin filter requires lowering or removing the glove box to access the service panel; the filter slides into a tray and captures pollen, dust, and road debris before air reaches the passenger compartment. In Albuquerque, seasonal pollen and dust loading can reduce HVAC performance, so inspect the cabin filter during regular service visits.

• Accessed by lowering or removing the glove box.
• Installed in a slide-in tray within the HVAC plenum.
• Captures pollen, dust, and debris from incoming air.

The engine air filter cleans intake air for combustion, while the cabin air filter cleans air entering the passenger cabin through the HVAC system.

The engine filter protects the 3.6L V6 and mass airflow sensor from dust and debris to preserve power and efficiency; the cabin filter protects occupants from pollen, dust, and exhaust particulates while improving ventilation. Both elements use different media and are installed in separate locations, so they should be inspected independently during service.

• Engine filter = protects engine intake and sensors.
• Cabin filter = protects HVAC airflow and passenger air quality.
• Different locations and replacement procedures for each filter.

Common signs are reduced engine power, lower fuel economy, rough or hesitant idle, weak HVAC airflow, and musty cabin odors.

A clogged engine filter increases intake restriction for the 3.6L V6, which can show up as sluggish acceleration and higher fuel use. A clogged cabin filter reduces blower effectiveness and can cause odors or increased dust in the cabin. If you notice any of these symptoms, book an inspection so a technician can verify condition and recommend replacement.

• Engine: reduced power and poorer fuel economy.
• HVAC: weak airflow and strange or musty odors in the cabin.
• Visual: dark, compressed filter media upon inspection.

The engine air filter is often DIY-friendly, while the cabin filter may need glove-box removal and trim work that some owners prefer to leave to a service center.

Many owners can change the engine air filter with basic tools and a short set of steps, but replacing the cabin filter can be trickier because it requires dropping the glove box and accessing the HVAC plenum. The dealer provides OEM-spec parts, intake and MAF visual checks, proper disposal, and documentation—services some owners value for long-term maintenance records.

• Engine filter: simple clip or screw removal—DIY possible.
• Cabin filter: glove-box access and trim removal are common.
• Dealer service includes OEM-spec parts and intake/MAF checks.

Yes — the dealership uses genuine OEM-spec parts for filter replacements and routine service.

Using genuine parts helps maintain factory fit, function, and filter media performance for the 3.6L engine and the HVAC system. The service center documents parts installed for service records, and technicians can verify part numbers and fitment during the appointment. Customers who prefer OEM-spec components can ask for them when scheduling.

• Genuine OEM-spec filters for correct fit and filtration.
• Technicians verify part numbers and installation during service.
• Service records document the parts used for future reference.

The service typically includes inspection and replacement of engine and/or cabin filters, a visual intake and MAF sensor check, and confirmation of proper fitment with OEM-spec parts.

Technicians will open the airbox or glove box, remove the old element, inspect the housing and intake for contamination, and install the OEM-spec replacement. The work is documented on your service record, and technicians note any related maintenance items. You can book service online or ask for service specials when you schedule.

• Inspection of airbox, intake, and MAF sensor.
• OEM-spec filter installation and fit verification.
• Service record entry and technician notes for follow-up.

You can schedule service online using the dealership's service scheduler at /service/schedule-service.htm.

Use the online scheduler to pick a convenient time for an inspection or filter replacement, or mention available service specials and any concerns about engine performance or HVAC airflow. The service team at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque can confirm parts availability and provide an estimate before work begins.

• Online scheduling link: schedule service
• Ask about current service specials when booking.
• Technicians confirm parts and estimated time during check-in.

Service for the 2017 Chrysler 300 at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque focuses on practical maintenance that reflects local driving conditions. Albuquerque's dry, dusty environment and seasonal pollen can accelerate filter loading, so technicians often recommend regular inspections during routine oil or brake service. Our service center serves drivers across Albuquerque and nearby communities; appointments can be booked on the service scheduler or by phone.

Technicians visually inspect the engine airbox, intake path, and cabin filter tray, and they document condition and replacement history for your vehicle's records. Bring your 2017 Chrysler 300 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque for OEM-spec filter service — schedule service.

A standard air filter replacement for the 2017 Chrysler 300 includes a step-by-step sequence: inspection of the existing filter media, removal and proper disposal of the old element, installation of an OEM-spec replacement, and a visual check of the intake housing and mass airflow sensor. The cabin filter service includes glove-box access, tray removal, and replacement with correct fitment to preserve HVAC airflow and interior air quality.

Technicians record the parts installed and note any related recommendations such as intake cleaning or MAF sensor service. If you find financing relevant to larger repairs, the dealership's finance team can discuss options. To book this service online, use the service scheduler or review current service specials.

The 2017 Chrysler 300's engine uses a serviceable air filter element sized to fit the factory airbox on the 3.6L V6; the cabin filter is a rectangular HVAC element located behind the glove box. Both filters use media designed for particulate capture appropriate to the vehicle's factory HVAC and intake design. Common local callouts include accelerated dust loading and pollen accumulation given Albuquerque driving conditions.

For accurate part numbers and OEM-fit replacements, bring your vehicle to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque so technicians can verify the correct filters for your VIN and install OEM-spec parts. Bring your 2017 Chrysler 300 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for OEM-spec filter service — schedule service.