2016 Ram 3500 Oil Change

$79–$129 is a typical dealer oil change price range for a 2016 Ram 3500 at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque.

Those price points reflect full service at a dealership that uses OEM-recommended fluids and filters and provides up-front pricing. Your final cost depends on oil type (conventional vs full synthetic) and whether additional services are added. Check current offers on our service specials.

• Typical dealer range: $79–$129 (varies by oil type).
• Includes OEM-spec oil and filter when selected.
• Ask for an up-front estimate at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque.

An oil change for a 2016 Ram 3500 typically takes about 45 minutes at the dealership service center.

Actual shop time depends on shop load and any added inspections or services; busy days can add time. Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque schedules appointments online, which helps reduce wait time—use the schedule service link to book.

• Estimated service bay time: ~45 minutes.
• Appointments reduce wait; schedule online before arrival.
• Additional services (filters, inspections) add time.

Follow the manufacturer interval—approximately every 6,000 miles for normal driving on the 2016 Ram 3500, with shorter intervals under severe duty.

Severe-duty conditions in Albuquerque—frequent towing, dusty roads, or many short trips—justify shorter intervals to protect engine components. Keep service records from Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque to document maintenance for warranty and resale.

• Typical interval: ~6,000 miles under normal driving.
• Severe-duty: reduce interval if towing, off-road, or stop-and-go lots.
• Keep stamps/receipts for warranty and resale value.

The 2016 Ram 3500 with the 5.7L V8 is typically specified to use SAE 5W-20 viscosity; Mopar-approved full synthetic is often recommended.

Using OEM-spec oil helps preserve engine function and aligns with recommended service. If you plan heavy towing or long highway runs out of Albuquerque, confirm synthetic options with our service advisors to match operating demands and the manufacturer's guidance.

• Typical viscosity: SAE 5W-20 for the 5.7L V8.
• OEM/Mopar-approved full synthetic oils are commonly recommended.
• Service advisors can confirm the exact Mopar part at your appointment.

The 2016 Ram 3500 with the 5.7L V8 typically requires about 6.0 quarts of oil with a filter change.

Exact capacity can vary slightly by engine variant and whether you include the filter; technicians at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque confirm the correct fill during service. Always verify capacity for your vehicle VIN at the time of service.

• Typical fill: ~6.0 quarts (with filter).
• Technician verifies exact capacity for your VIN.
• Proper fill level is checked and recorded during service.

Dealer service typically includes OEM-spec oil and filter, a multi-point inspection, and record-keeping; quick-lube shops may be cheaper for conventional oil but often omit these dealer services.

For a 2016 Ram 3500, dealer service preserves documented maintenance history and uses Mopar-approved parts when requested. If price is the priority and you use equivalent oil and keep receipts, quick-lube can be appropriate; weigh cost vs documentation and OEM parts.

• Dealer: OEM-spec oil/filter, inspection, service records.
• Quick-lube: often lower price for conventional oil, fewer records.
• Decide based on warranty, documentation, and oil spec needs.

Skipping scheduled oil changes does not automatically void the warranty, but failing to follow recommended intervals and keep service records can lead to denial of specific warranty claims.

Maintain documented service records showing OEM-spec oil and timely intervals to support warranty coverage. If warranty repair is needed, manufacturers and warranty administrators expect proof that the engine was maintained according to recommendations.

• Keep stamped receipts or service records for each oil change.
• Use the recommended oil viscosity and specs to avoid disputes.
• Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque can provide documented service history.

Full synthetic offers better high- and low-temperature protection and longer life than conventional oil; synthetic blend is intermediate in performance and cost for the 2016 Ram 3500.

For the 5.7L V8 in the 2016 Ram 3500, Mopar-approved full synthetic helps with cold starts, heat stability when towing, and extended drain capability. Choose oil type based on driving patterns—frequent towing or long highway use favors full synthetic.

• Full synthetic: best thermal stability and protection for heavy use.
• Synthetic blend: lower cost with improved performance over conventional.
• Conventional: lowest cost, appropriate for light, everyday driving if within OEM specs.

The 2016 Ram 3500 requires attention to oil type and service intervals to match towing and local driving. Albuquerque drivers face dry, dusty conditions and occasional high-mileage towing that increase engine stress; regular oil changes help control soot and particulate exposure. Our service center at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque performs oil changes tailored to the 2016 Ram 3500, accounting for its 5.7L V8 and typical towing loads.

We serve Albuquerque and surrounding neighborhoods; schedule a visit online to limit wait times via the schedule service link. Technicians inspect for dust seals, air filtration condition, and cooling-system readiness when you arrive, so your 2016 Ram 3500 is set for local roads and towing duties.

An oil change for a 2016 Ram 3500 at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque follows a clear checklist so your vehicle receives OEM-level care. The service includes an oil drain and proper disposal, installation of a Mopar-approved oil filter (when selected), and refill with the recommended oil type and quantity for the 5.7L V8.

Technicians perform a multi-point inspection, top off fluids, and check tire pressures and belts—documenting everything on your receipt. Warranty considerations are observed by using OEM-spec parts when requested and by keeping service records; check current pricing and offers on our service specials. To book, schedule service.

The 2016 Ram 3500 with the 5.7L V8 typically calls for SAE 5W-20 viscosity and approximately 6.0 quarts of oil when changing the filter. Using a Mopar-approved full synthetic oil provides improved cold-start flow and thermal stability for towing and heavy-duty use common in New Mexico. Our technicians confirm the exact oil spec and capacity for your VIN before service.

Filter selection and proper torque are part of the service; technicians inspect for any oil leaks or common service items while the engine is accessible. Bring your 2016 Ram 3500 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for an OEM-spec oil change — schedule service.