2016 RAM 1500 Alignment in Albuquerque, NM

At Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque, a four-wheel alignment typically ranges from $89 to $129.

That price range reflects a standard four-wheel alignment for a used 2016 Ram 1500 Quad Cab with 4WD and OEM adjustment points; the dealership provides up-front pricing and a full suspension inspection before work begins. Final cost can change if worn components need replacement to hold alignment.

• Range: $89–$129 for a standard four-wheel alignment
• Includes before/after readings and factory-spec adjustments
• Repairs or parts are quoted separately after inspection

A typical four-wheel alignment for a 2016 Ram 1500 takes about 60 minutes.

Time depends on whether suspension or steering parts need replacement first; a used 2016 Ram 1500 with intact components is usually completed within an hour. The service includes inspection, measurement, adjustment to factory settings, and a road test on local Albuquerque roads.

• Estimated duration: ~60 minutes
• Includes full suspension inspection and road test
• Longer if parts or repairs are required

Get an alignment every 2–3 years or about every 30,000 miles, and after any major suspension work or a hard pothole impact.

Albuquerque roads, seasonal frost heaves, and construction can accelerate misalignment, so check alignment sooner if you notice symptoms. Regular inspections during oil or tire service help catch drift before uneven tire wear becomes serious.

• Routine interval: 2–3 years or ~30,000 miles
• After suspension or steering component replacement
• After significant pothole or curb impact

Key signs include uneven tire wear, the truck pulling to one side, an off-center steering wheel, or vibration at speed.

For a used 2016 Ram 1500 Quad Cab, these symptoms often appear after hitting potholes or after heavy towing. If you notice any of them, bring the truck in so technicians can inspect tie rods, ball joints, and mounts before attempting an alignment.

• Uneven or scalloped tire wear patterns
• Vehicle pulls to left or right while driving
• Off-center steering wheel or steering vibration

A 2016 Ram 1500 four-wheel alignment includes caster, camber, and toe measurement and adjustment to factory specifications with before-and-after printouts.

The service also covers a visual suspension and steering inspection, tire pressure and condition check, and a road test to confirm handling. Technicians use OEM-grade alignment equipment calibrated to Ram factory specs for the 2016 Ram 1500.

• Caster, camber, and toe set to factory specs with printouts
• Suspension and steering component inspection
• Post-service road test on local roads

If tie rods, ball joints, wheel bearings, or control arm bushings are worn, those parts must be repaired before an alignment will hold.

Technicians at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque inspect steering and suspension components as part of the alignment process for the 2016 Ram 1500. If wear or damage is found, you’ll receive a written estimate and explanation before repair work.

• Suspension inspection precedes alignment
• Worn tie rods or ball joints require repair before alignment
• Written estimate provided for any needed parts or labor

A four-wheel alignment for the 2016 Ram 1500 Quad Cab begins with a detailed inspection: steering linkage, tie rods, ball joints, control arms, and wheel bearings are checked for wear or damage. Technicians verify tire condition and pressure, then mount the truck on OEM-calibrated alignment equipment to measure caster, camber, and toe on the front and rear. Adjustments are made to bring all settings back to Ram factory specifications, and we print before-and-after readings so you can see the correction.

The service finishes with a road test to confirm straight tracking and steering wheel centering. If suspension parts are worn and need replacement, the team will provide a clear estimate and explain next steps. Schedule service online or call to set a time: schedule service.

Alignment work on a 2016 Ram 1500 Quad Cab targets factory caster, camber, and toe specifications for both front and rear axles; technicians use OEM alignment equipment to measure and return the truck to those factory values. Exact numeric specs vary by axle and suspension options, so measurements are taken and corrected to the appropriate Ram factory chart for this model.

Common alignment-related issues for this model include toe shift after heavy towing or impacts and uneven wear from prolonged driving on rough or potholed roads. Technicians focus on both corrective adjustment and identifying worn components that would prevent the alignment from holding. Bring your 2016 Ram 1500 to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for a factory-spec alignment — schedule service.

Our service center supports drivers across Albuquerque and nearby communities with alignment and suspension work for the 2016 Ram 1500 Quad Cab. Local road conditions — potholes, construction, and seasonal pavement changes — can affect steering and tire wear, so we recommend inspections if you tow often or notice handling changes. The dealership provides OEM diagnostic tools and a documented before/after alignment report to verify results.

Find service specials on our site (service specials) and use the online scheduler to book an appointment. For questions or to arrange a same-day check, call the service desk or schedule service. Directions and contact details are available on our main site.