2013 RAM 2500 Air Filter in Albuquerque, NM

Typical parts-and-labor cost at the dealer runs about $30–$75 for the engine air filter and $25–$60 for the cabin air filter.

Those ranges reflect Mopar OEM parts and dealer labor for a 5.7L V8 crew cab like the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}. Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque provides up-front pricing and will list whether the quoted work includes filter parts, labor, inspection of the intake and MAF sensor, and proper disposal of the old filter.

• Engine filter parts + labor: typically $30–$75
• Cabin filter parts + labor: typically $25–$60
• Up-front quote and Mopar OEM parts available at the dealership

Follow the vehicle owner’s manual for the specified interval for the 5.7L V8; maintenance frequency rises in dusty climates like Albuquerque.

The exact mileage interval appears in your owner’s guide for the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}, and technicians at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque will inspect the filter visually at each service. In New Mexico’s dry, dusty seasons, filters can load faster than in wetter climates, so technicians may recommend earlier replacement based on condition, not just mileage.

• Inspect filter at every scheduled service
• Replace earlier when driving on dusty roads or construction sites
• Technician visual check included with dealer service

Consult the owner’s manual for the exact cabin-filter interval; replace sooner in high-pollen or dusty seasons in Albuquerque.

Cabin filter life varies with environment and use; technicians at Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque will check the cabin filter during HVAC or routine services and advise replacement based on condition. Replacing the cabin filter keeps HVAC airflow strong and reduces dust, pollen, and odors in the Crew Cab passenger area.

• Cabin filter inspection during HVAC checks
• Replace earlier in pollen season or dusty driving conditions
• Dealer can install Mopar OEM cabin filters when needed

The engine air filter for the 5.7L V8 is located inside the engine bay airbox, typically on the driver-side intake housing.

On the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}} the element sits in a plastic airbox that secures the intake tubing feeding the 5.7L V8. Technicians inspect the housing, seals, and mass airflow (MAF) sensor during replacement to ensure a proper seal and correct airflow for the engine’s 383 hp output.

• Engine filter housed in under-hood airbox
• Technician inspects intake tubing and MAF sensor
• Proper sealing prevents unfiltered air ingress

The cabin air filter is usually located behind the glove box in the passenger compartment of the Crew Cab.

For the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}, accessing the cabin filter typically involves lowering or removing the glove box trim to reach the filter door. Dealer service includes a visual check of the HVAC housing and drain to ensure no blockages or moisture-related issues that can cause odors or reduced airflow.

• Access usually via glove box removal or drop-down panel
• Dealer inspects HVAC housing and drain during service
• Mopar cabin filters are available for replacement

The engine air filter protects the 5.7L V8 intake for combustion, while the cabin air filter protects passengers and the HVAC system from dust and pollen.

The engine filter keeps abrasive particles out of the intake to preserve power and fuel economy for the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}’s 383 hp powerplant; the cabin filter prevents contaminants from entering the passenger compartment and HVAC evaporator. Both filters serve different systems and should be checked independently during service appointments.

• Engine filter protects combustion system and MAF sensor
• Cabin filter protects HVAC and passenger air quality
• Dealer can replace either or both with Mopar OEM parts

Common signs include reduced engine response, lower fuel economy (noting the vehicle’s baseline 13 city / 17 highway mpg), rough idle, and weak HVAC airflow or musty cabin odors.

If you notice sluggish acceleration or a drop from the expected performance of the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}’s 5.7L V8, a clogged engine filter may be restricting airflow; similarly, reduced HVAC airflow or odors point to a saturated cabin filter. Dealer technicians perform a visual inspection and advise replacement as needed.

• Reduced throttle response or lower mpg
• Rough idle or unusual engine behavior
• Weak HVAC airflow, dust, or musty odors in cabin

The engine air filter is often DIY-accessible in the engine bay airbox, but the cabin filter and intake/MAF inspection are reasons to bring it to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque.

DIY replacement of the engine filter is possible for owners comfortable working under the hood of a 5.7L V8 truck, but dealer service adds value by using Mopar OEM filters, checking the intake housing and MAF sensor, and documenting condition for warranty records. Use the dealer’s schedule service link to book if you prefer a technician handle it.

• Engine filter: often replaceable at home
• Cabin filter: may require glove-box trim removal
• Dealer provides intake/MAF inspection and OEM parts

The {{vehicle.year}} {{vehicle.make}} {{vehicle.model}} is fitted with a 5.7L V8 (engine code 8VNAG5.7) that requires a properly sized engine air filter and a separate cabin air filter for the HVAC system. OEM (Mopar) engine filters are made to seal the intake housing, prevent dust ingress, and keep the mass airflow sensor operating within specification for the truck’s 383 horsepower and torque delivery.

Cabin filters for the Crew Cab focus on removing pollen, dust, and roadway particulates from the passenger compartment. In Albuquerque’s dry and dusty climate, both filters can load faster; technicians verify element condition during routine maintenance and recommend replacement based on visual condition and driving conditions. Bring your {{vehicle.year}} {{vehicle.make}} {{vehicle.model}} to Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque in Albuquerque for OEM-spec filter service — schedule service.

We service drivers throughout Albuquerque and surrounding areas, where dust, pollen, and occasional construction activity increase airborne particulates. Those conditions can shorten the effective life of both engine and cabin filters on a {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}. Our technicians perform a visual filter check, inspect intake seals, and clear HVAC drains when needed to prevent odors or moisture buildup.

Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque provides clear, documented service recommendations and offers Mopar OEM parts. If you’re noticing reduced airflow or a performance change in your {{vehicle.year}} {{vehicle.make}} {{vehicle.model}}, contact the service center to review filter condition and options. Schedule service or check current service specials.

A standard engine and cabin air filter replacement for the {{vehicle.year}} {{vehicle.make}} {{vehicle.model}} includes parts, labor, and a basic intake inspection. The service steps are: inspect the existing engine air filter element and airbox seals; replace the engine air filter with a Mopar OEM unit if required; access and inspect the cabin filter behind the glove box and replace as needed; and perform a visual check of the MAF sensor and intake tubing for contamination or loose clamps.

Dealer service documents the work and provides an up-front price quote, and warranty coverage for parts follows the dealership’s published parts warranty terms. If you prefer financing for larger service packages, discuss available options with the service advisor. To arrange service, schedule service online or visit Larry H. Miller Chrysler Jeep Dodge Ram Albuquerque.